-
Which is the best acid washing tower manufacturer
The principle of acid washing (using hydrochloric acid as an example) dissolution effect: Hydrochloric acid can dissolve three layers of iron oxide scale. Mechanical peeling action: Fe+2HCl → FeCl2+H2, generating a large amount of hydrogen gas. Due to the expansion pressure of hydrogen gas, the iron sheet is peeled off from the surface of the steel strip. Reduction effect: Reducing high valent iron oxide compounds and high valent iron salts into low valent iron oxide compounds and low valent iron salts that are easily soluble in acid solution. The reaction formula is Fe2O3+2 {H}=2 FeO+H2O. The advantages of hydrochloric acid pickling by the acid washing tower manufacturer; Can completely dissolve Date：2024-01-12 -
Washing tower manufacturer, how much is the washing tower
Washing tower is a new type of gas purification treatment equipment. It is improved on the basis of a floating packing layer gas purifier and is widely used in pre-treatment of industrial waste gas purification, dust removal, and other aspects, with good purification effects. For coal gasification process, gas washing is inevitable, and this unit operation is used in all coal gasification technologies. Due to its working principle similar to the washing process, it is named the washing tower. A washing tower is similar to a distillation tower, consisting of a tower body, a tray, and a reboiler, Date：2024-01-12 -
Spray tower price, spray tower manufacturer
The packing layer inside the spray tower serves as a mass transfer device for the gas-liquid two-phase contact component. The bottom of the packed tower is equipped with a packing support plate, and the packing is placed on the support plate in a disorderly manner. Install a packing pressure plate above the packing to prevent it from being blown by upward airflow. The spray liquid of the spray tower is sprayed onto the packing through the liquid distributor from the top of the tower and flows down along the surface of the packing. Gas is sent from the bottom of the tower, distributed by the gas distribution device, and continuously flows against the liquid through the gaps in the packing layer. On the surface of the packing, the gas-liquid two phases are in close contact for mass transfer. When liquid flows downwards along the packing layer, wall flow phenomenon may sometimes occur, and the wall flow effect causes uneven distribution of gas-liquid phases in the packing layer, resulting in a decrease in mass transfer efficiency. Therefore, the filling layer inside the spray tower is divided into two sections, with a redistribution device installed in the middle. After redistribution, it is sprayed onto the lower filling layer.Spray tower manufacturer1. Adjustment of circulating water volume: It is determined by the spray tower water supply pump. When one boiler is running, one can be turned on. When two or three pumps are running simultaneously in winter, both pumps should be turned on. The flow rate of the mud pump should be adjusted according to the flow rate of the circulating pump to make it equal.2. Dosage in the dosing tank of the spray tower: When running a boiler, add 2 bags of alkali and 5 bags of hydrated lime. If two or three boilers are running in winter, the dosage can be increased by a corresponding multiple.The sedimentation tank of the spray tower should be cleaned regularly, once a week in summer and once every three days in winter.4. When discharging the ash water separator, it should be discharged once per shift. The discharge valves should be opened separately until clear water is discharged.5. The above rotating components should be regularly inspected and lubricated, and any faults should be promptly eliminated to ensure the desulfurization effect of the spray tower.6. When adding medication up and down stairs, attention should be paid to safety, and there should be independent security and mutual security awareness.7. After work is completed, it is necessary to clean up and tidy up in a timely manner, and ensure that the site is clean when people leave. Date：2024-01-12 -
The operation reliability of the desulfurization tower is high, and the process absorption effect is good
The installation of the desulfurization tower is convenient, so it can save installation time. The characteristics it possesses include:1. Mature technology and high operational reliability;2. Desulfurization slag is non-toxic, with extremely low solubility and no secondary pollution, and can be comprehensively utilized;3. Sodium alkali recycling, low loss, and low operating cost;4. Sodium alkali absorbents have high reaction activity and fast absorption speed, and can use low liquid to gas ratios to reduce operating costs;5. Flexible operation and strong adaptability to changes in coal types. The desulfurization tower process has good absorption effect and high utilization rate of absorbent. Factors such as pH value and liquid gas ratio can be adjusted appropriately according to changes in boiler coal type to ensure the realization of designed desulfurization rate. Date：2024-01-12 -
The performance of fiberglass desulfurization tower is quite stable
Fiberglass desulfurization tower:1. Suitable for operating equipment without noise. The performance of the desulfurization tower is quite stable, and there should be no noise generated during operation. If there is noise, it should be stopped immediately to check if the equipment is installed correctly,2. Check if the tower installation is stable. This may seem like an inconspicuous small matter, but it is important for the normal use of fiberglass desulfurization towers. Purification towers are equipment that needs to be used for a long time, so installation must be firm,3. Check if the fan is running properly. The fan inside the tower plays a crucial role in the normal operation of the desulfurization tower, and the performance of the fan determines the efficiency of equipment desulfurization. Daily attention must be paid to the maintenance of the fan.4. The tower body should avoid approaching flammable and explosive materials. Fiberglass belongs to flammable materials, so it is important to pay attention to fire prevention in daily life.The flue gas desulfurization system is used for the function of thermal power plants, mainly to remove sulfides from the flue gas. There are two methods for desulfurization: one is to add an absorbent to coal, so that SO2 reacts during the combustion process to generate solid waste, which remains in fly ash. This desulfurization technology, also known as dry desulfurization, has an efficiency of no more than 80% and is now rarely used; Another method is to install an absorption tower after the dust collector, using alkaline liquid to wash and absorb SO2 in the flue gas, in order to achieve the goal of purifying the flue gas. This technology, also known as wet flue gas desulfurization, has a theoretical desulfurization rate of up to 99%.Desulfurization tower refers to the core device of wet desulfurization. In the field of desulfurization, a desulfurization tower, also known as an absorption tower, as the name suggests, is a device that absorbs pollutants. Broadly speaking, a tower that undergoes reactions such as SO2 absorption within it.The so-called industrial absorption tower, in simple terms, the fiberglass absorption tower used in industry is an industrial absorption tower, but not all absorption towers can be used in industry, especially absorption towers that do not meet industrial usage requirements cannot be used in industry. So only absorption towers that meet what requirements can be used in industry?As an industrial fiberglass absorption tower, it can be used in industry. Firstly, the contact surface and time between gas and liquid inside the tower should be sufficient. Secondly, the disturbance in gas-liquid two-phase should be strong. Secondly, the industrial absorption tower should meet the requirements of simple operation, high operational stability, low resistance, low energy consumption, and easy maintenance. In addition, absorption towers used in industry also need to have certain mechanical strength and corrosion resistance.1. Thermal power plants generally use cooling towers. After heating, water generates high-pressure gas to drive the turbine to generate electricity, while the remaining gas needs to be cooled. The working principle is as follows: the water on the cooling tower of the power plant is pumped up and evenly dispersed and dropped down through a water distributor. Generally, the height of the cooling tower is several tens of meters, like a huge chimney, which can draw air up from below and take away heat during the contact between air and water droplets, thus serving as cooling water2. Central air conditioning also has a cooling tower function to cool the circulating liquid.3. There are also professional FRP cooling towers, commonly known as cooling water towers, cold water towers, cooling water towers, FRP towers, water towers, etc., which are mainly square, round, cross flow, counter flow, and packless spray type series cooling towers. Date：2024-01-12 -
Working principle and characteristics of fiberglass desulfurization tower
Fiberglass desulfurization tower:1. The washing type working principle has high dust removal and desulfurization efficiency, and captures a lot of harmful gases. The BTL flue gas purifier integrates desulfurization and dust removal. It adopts a spray method and a unique nozzle design. It uses a fiberglass spiral nozzle made of American technology to spray dense layers of water mist under a certain water supply pressure. Dust and harmful gases fully contact the water mist, so the effectiveness of dust removal, desulfurization, nitrogen removal, and carbon black washing is greatly improved compared to other wet dust collectors. Dust removal rate ≥ 98%, sulfur dioxide removal rate ≥ 85%, and flue gas Lingermann blacknessDate：2024-01-12 -
Overview of Odor Waste Gas Treatment
Overview of Odor Waste Gas Treatment:Stinky gas pollution is a gas substance that affects the olfactory organs, causing unhappiness and endangering the living environment. It is a relatively common environmental hazard that has been internationally recognized. It is studied and controlled as a single listed hazard.In recent years, China has also begun to pay attention to the monitoring and prevention of odorous waste gas treatment, and has formulated emission standards and analysis methods for some odorous compounds. The primary goal of the odor pollution prevention and control policy is to meet the emission standards for odor substances specified in GB 14554-93, with the ultimate intention of eliminating odor and creating a odorless working and living environment.The amount of odor perceived by people is directly proportional to the impact of odorous substances on their sense of smell. It is clear that even if 90% of the odorous exhaust gas is removed, the concentration of odor perceived by people's sense of smell only decreases by half. This determines that the prevention and control of odorous waste gas treatment is more difficult than the prevention and control of other atmospheric pollutants. To eliminate odors, it is dozens to thousands of times more stringent than meeting emission standards. Therefore, strengthening the treatment of odorous waste gas pollution is very important. Date：2024-01-12 -
Efficient, economical and practical organic waste gas and environmental protection equipment
Activated carbon adsorption environmental protection equipment is a high-efficiency, economical and practical equipment for purifying and treating organic waste gas; It is an environmentally friendly equipment product that filters and adsorbs odors from exhaust gas. Activated carbon adsorption tower has the advantages of high adsorption efficiency, wide applicability, convenient protection, and the ability to treat various mixed waste gases together. This equipment is an adsorption device for purifying high concentration organic waste gas and spray paint waste gas. It uses activated carbon to have a strong adsorption force and is connected with the fan effect to adsorb organic waste gas molecules. It has excellent adsorption effect on waste gases of organic solvents such as benzene, alcohols, ketones, esters, and gasoline. Our company has summarized the production experience of similar products in domestic and international markets based on practical equipment and application conditions, improved planning and production, and launched activated carbon adsorption towers with convenient cutting forms, excellent surface flatness, higher structural strength, and stronger adsorption capacity. Our company produces various standard activated carbon adsorption towers. The adsorption time is planned based on the different gas pollution factors, and the adsorption area is determined based on the amount of waste gas processed. Each project is a brand new planning scheme. For the characteristics of exhaust gases emitted from different technologies, such as exhaust gas temperature, whether they are rich in oil mist, dust, and other related parameters, some pre-treatment equipment or functional sections such as coolers and filters are built-in or added to the inlet of exhaust gas equipment. Excellent protection of the adsorption section, ensuring the efficient operation of the adsorption tower.The functional characteristics of activated carbon adsorption environmental protection equipment:1. High adsorption efficiency and strong ability;2. The equipment has a compact structure, a small footprint, simple and convenient protection procedures, and low work costs;3. Capable of handling various mixed organic waste gases together;4. Using automated control work planning, easy to operate and safe;5. Fully enclosed, can be used both inside and outside the room.Scope of applicability of activated carbon adsorption environmental protection equipment:Suitable for working environments with low concentration high air volume or high concentration intermittent exhaust emissions. The primary application areas include: electronic component production, battery (battery) production, acid washing workshop, laboratory exhaust, metallurgy, chemical plants, pharmaceutical production plants, painting workshops, food and brewing, furniture production and other occupational waste gas purification, among which the most suitable for spray painting waste gas treatment purification. Date：2024-01-12
