Working principle and characteristics of fiberglass desulfurization tower
Fiberglass desulfurization tower:
1. The washing type working principle has high dust removal and desulfurization efficiency, and captures a lot of harmful gases. The BTL flue gas purifier integrates desulfurization and dust removal. It adopts a spray method and a unique nozzle design. It uses a fiberglass spiral nozzle made of American technology to spray dense layers of water mist under a certain water supply pressure. Dust and harmful gases fully contact the water mist, so the effectiveness of dust removal, desulfurization, nitrogen removal, and carbon black washing is greatly improved compared to other wet dust collectors. Dust removal rate ≥ 98%, sulfur dioxide removal rate ≥ 85%, and flue gas Lingermann blackness<level 1. 2. The design of the dehydration board is reasonable and unique, and the dehydration effect is good. There is a dehydration device inside the cylinder, and the design of the dehydration plate is reasonable and unique. When the mist passes through the dehydration device, it is collided and intercepted to change direction, flowing down the cylinder wall to prevent secondary water entrainment, resulting in high dehydration efficiency.
3. Low resistance, water-saving, energy-saving, and low operating costs. Smoke is naturally introduced from the lower part of the cylinder, with a large cross-section and low wind speed, resulting in low smoke resistance. The main body resistance is ≤ 900Pa, and the system resistance is ≤ 1200Pa. Due to the small resistance, the power consumption is also small. In addition, the discharged water is precipitated and closed for recycling, which not only saves water resources but also prevents sewage from flowing into the sewer, causing secondary pollution, achieving water-saving and energy-saving effects, and reducing operating costs.
4. Small size, light weight, small footprint, convenient installation and transportation. This product has a cylindrical shape and belongs to the overall structure. When it leaves the factory, it comes with a bracket, which is very convenient to install and move. It can be installed in various ways such as hanging left and right, overhead laying, etc. according to the size and ground situation of the place, with strong adaptability.
5. The operation is relatively simple and convenient, with minimal maintenance, making it easy to operate, manage, and maintain. It has a high operating rate and is suitable for various working environments.